Account
01202 650900
HPL Postformed Laminated Vanity Top (Inset Style)
£289.20 £241.00
This High-Pressure Laminate (HPL) vanity top is for inset or lay-on style wash hand basins. It offers a stylish design at an affordable price. It is suitable for use with either a support leg or vanity underframe (VUUF) with easy-access panels.
The vanity top is manufactured from a fully formed 18mm thick High-Pressure Laminate (HPL) sheet. Its moisture-resistant core is shaped to provide a rear upstand and front downstand. The vanity top is supplied without basin holes; the purchaser must cut these on-site to suit the desired basin.
30 days free credit with
Buy Now, Pay Later, options at checkout
This high-pressure Laminate (HPL) vanity top suits inset or lay-on style wash hand basins. It offers a stylish design at an affordable price.
It is suitable for use with either a support leg or vanity underframe (VUUF) with easy-access panels.
The vanity top is manufactured from a fully formed 18mm thick High-Pressure Laminate (HPL) sheet. Its moisture-resistant core is shaped to provide a rear upstand and front downstand.
The vanity top is supplied without holes for basins; the purchaser must cut these on-site to suit the desired basin.
Ideally suited to dry environments, the vanity top is sold separately from the support leg or underframe/access panels. The price displayed is for a vanity top only. Please see our SGL Postformed Laminated Vanity Top for a wet environment option.
Underframes and access panels can be purchased in either High-Pressure Laminate (HPL) or Solid Grade Laminate (SGL). *HPL should only be used in a predominantly dry environment where the risk of water dropping onto the access panels is minimal. SGL underframes are suitable for wet or dry environments.
Vanity Top Colours
HPL vanity tops come in various laminate colours from the Polyrey washroom collection. Please see the attached PDF for details. Alternative colours are available on request.
Vanity Top Sizes
Vanity units are priced and purchased at various length bands but are usually manufactured to your exact requirements. This inset unit is supplied 600mm deep, as standard (bespoke dimensions available). It has a 100mm rear up-stand and a 200mm forehead (front down stand).
After purchasing online, we will be in contact to establish the exact dimensions of the vanity unit you require and your desired colours. Any top over 2500mm long may have a join in the top.
If your vanity unit is positioned so that either end is exposed (and not against a wall), you must order end capping for each exposed end. Capping is not required if the vanity unit runs from wall to wall. A corresponding end panel can also be supplied for the underframe.
All vanity units and toilet cubicles displayed on the Commercial Washrooms website are straightforward to install for any competent tradesman.
Vanity Tops:
- 0-1000mm - PFLVANHPL-0-I
- 1001-1500mm - PFLVANHPL-1500-I
- 1501-2000mm - PFLVANHPL-2000-I
- 2001-2500mm - PFLVANHPL-2500-I
- 2501-3000mm - PFLVANHPL-3000-I
- 3001-3500mm - PFLVANHPL-3500-I
- 3501-4000mm - PFLVANHPL-4000-I
Underframe and Access Panels:
- HPL 0-1000mm - HPLVUUF-1000
- HPL 1001-1500mm - HPLVUUF-1500
- HPL 1501-2000mm - HPLVUUF-2000
- HPL 2001-2500mm - HPLVUUF-2500
- HPL 2501-3000mm - HPLVUUF-3000
- HPL 3001-3500mm - HPLVUUF-3500
- HPL 3501-4000mm - HPLVUUF-4000
- SGL 0-1000mm - VUUF-1000
- SGL 1001-1500mm - VUUF-1500
- SGL 1501-2000mm - VUUF-2000
- SGL 2001-2500mm - VUUF-2500
- SGL 2501-3000mm - VUUF-3000
- SGL 3001-3500mm - VUUF-3500
- SGL 3501-4000mm - VUUF-4000
Return End Panel:
- SGL Underframe End Panel - 1RPSGL
- HPL Underframe End Panel - 1RPHPL
End Cap:
- HPL Vanity Top End Capping - 1CAPHPL
-
Do you Tile Behind a Vanity Unit? To tile behind a Bathroom Sink Vanity Unit or not? Here we aim to guide installers who are tiling walls behind Bathroom Sik Vanity Units during a Washroom Refurbishment.
Full delivery details, including costs and timescales, can be found on our delivery service information page.
Product Returns
We are happy to accept returned items that are no longer required as long as they are in A1 condition and in their original unopened packaging. To arrange a return, please notify our after-sales team within five days of delivery.
If any goods are found to be damaged or faulty, we require email evidence and confirmation within two working days of receipt.
Any non-faulty Goods which are non-stock Goods, or which are bespoke, made-to-measure, personalised, customised, made to the Customer’s specification or specially ordered (Restricted Goods) may not be returned.
Email: [email protected]
Phone: 01202 650900
Product Warranty
Many of the products we sell come with a manufacturer’s warranty, guarantee or similar assurance. Although we do not have any responsibility or liability under or in connection with any such warranty, guarantee or assurance, we will manage any warranty claim. Please contact us in the first instance.
Email: [email protected]
Phone: 01202 650900
